Welcome to Hydro Design Service Inc. and Hydraulic Super Shop Ph: 615-758-9096 Fax: 615-758-9211
     Welcome to Hydro Design Service Inc.            and Hydraulic Super Shop    Ph: 615-758-9096     Fax: 615-758-9211          

       Aluminum Gear pumps

          AA mount pumps specifications:

                                          http://www.dynamicfc.com/documents/GP-F10.pdf 

AA mount gear pump with keyed shaft and RH rotation
( Sales tax and shipping costs not included )

Model GP-F10 offers aluminium body and cast iron end plates.The standard mounting flange is SAE AA – 2 bolt,-8 inlet,-6 outlet oring ports,
7 displacement sizes from 0.7 to 0.31 cu.in/rev.3500 PSI max.
RH rotation.
Drive shaft is a 1/2 inch diameter straight with 1/8" straight key.

GP-F10-XX-P-C
Displacement XX=cu/in per revolution[GPM at 1800 RPM}
or
AA mount gear pump with keyed shaft and LH rotation

Model GP-F10 offers aluminium body and cast iron end plates.The standard mounting flange is SAE AA – 2 bolt, -8 inlet,-6 outlet oring ports,
7 displacement sizes from 0.7 to 0.31 cu.in/rev.3500 PSI max.
LH rotation.
Drive shaft is a 1/2 inch diameter straight with 1/8" straight key.

GP-F10-XX-P-A
Displacement XX=cu/in per revolution[GPM at 1800 RPM}

                             A mount gear pump specification link:

                    http://www.dynamicfc.com/documents/GP-F20.pdf

A mount gear pumps with keyed shaft,RH rotation

Model GP-F20 offers aluminium body and cast Iron end plates,-12 inlet,-10 outlet oring ports,
8 displacement sizes from 0.24 to1.95 cu.in/rev.3000 PSI max.
RH rotation.The standard mounting flange is SAE A – 2 bolt,
Drive shaft is a 5/8 inch diameter straight with 5/32 straight key.

GP-F20-XX-P-C
Displacement XX=cu/in per evolution [GPM at 1800 RPM}
A mount gear pumps with splined shaft,RH rotation

Model GP-F20 offers aluminium body and cast Iron end plates,-12 inlet,-10 outlet oring ports,
8 displacement sizes from 0.24 to1.95 cu.in/rev.3000 PSI max.
RH rotation.The standard mounting flange is SAE A – 2 bolt,
Drive shaft is a 5/8 inch diameter 9 tooth spline

GP-F20-XX-S9-C
Displacement XX=cu/in per evolution [GPM at 1800 RPM}
A mount gear pumps with keyed shaft,LH rotation

Model GP-F20 offers aluminium body and cast Iron end plates,-12 inlet,-10 outlet oring ports,
8 displacement sizes from 0.24 to1.95 cu.in/rev.3000 PSI max.
LH rotation.The standard mounting flange is SAE A – 2 bolt,
Drive shaft is a 5/8 inch diameter straight with 5/32 straight key.

GP-F20-XX-P-A
Displacement XX=cu/in per evolution [GPM at 1800 RPM}
A mount gear pumps with splined shaft,LH rotation

Model GP-F20 offers aluminium body and cast Iron end plates,-12 inlet,-10 outlet oring ports,
8 displacement sizes from 0.24 to1.95 cu.in/rev.3000 PSI max.
LH rotation.The standard mounting flange is SAE A – 2 bolt,
Drive shaft is a 5/8 inch diameter -9 tooth spline

GP-F20-XX-S9-A
Displacement XX=cu/in per evolution [GPM at 1800 RPM}

                               B mount gear pump specification link:      

        http://www.princehyd.com/Portals/0/pumps/pumpssp2025.pdf

B mount gear pumps,RH rotation,keyed shaft

Model SP-25 offers aluminium body and end plates,-16,-20,-24 inlets,-12 and -16 outlet oring side ports,
8 displacement sizes from .499 to3.869 cu.in/rev.2500 to 3000 PSI
RH rotation.The standard mounting flange is SAE B – 2 bolt,
Drive shaft is a 7/8 inch diameter straight with 1/4 key.

SP25A-XX-A9H2-R
Displacement XX=cu/in per evolution [GPM at 1800 RPM}
B mount gear pumps,RH rotation,spline shaft

Model SP-25 offers aluminium body and end plates,-16,-20,-24 inlets,-12 and -16 outlet oring side ports,
8 displacement sizes from .499 to3.869 cu.in/rev.2500 to 3000 PSI
RH rotation.The standard mounting flange is SAE B – 2 bolt,
Drive shaft is a 7/8 inch diameter 13 spline

SP25A-XX-A9H1-R
Displacement XX=cu/in per evolution [GPM at 1800 RPM}
B mount gear pumps,LH rotation,keyed shaft

Model SP-25 offers aluminium body and end plates,-16,-20,-24 inlets,-12 and -16 outlet oring side ports,
8 displacement sizes from .499 to3.869 cu.in/rev.2500 to 3000 PSI
LH rotation.The standard mounting flange is SAE B – 2 bolt,
Drive shaft is a 7/8 inch diameter straight with 1/4 key.

SP25A-XX-A9H2-L
Displacement XX=cu/in per evolution [GPM at 1800 RPM}
B mount gear pumps,LH rotation,splined shaft

Model SP-25 offers aluminium body and end plates,-16,-20,-24 inlets,-12 and -16 outlet oring ports,
8 displacement sizes from .499 to3.869 cu.in/rev.2500 to 3000 PSI
LH rotation.The standard mounting flange is SAE B – 2 bolt,
Drive shaft is a 7/8 inch diameter 13 tooth spline

SP25A-XX-A9H1-L
Displacement XX=cu/in per evolution [GPM at 1800 RPM}

Cast iron gear pumps

MH101 and MH102 Dump pumps

Metaris MH Series dump pumps are known for their ruggedness, reliability
and interchangeability. Available in both the 101 Remote Mount and the 102
Direct Mount configurations and C or G frames, these pumps offer cast iron
construction, a variety of displacements and "Air Shift" capabilities.

 

Pump Series   Displacement-in³/r   Max rpm      gpm@1200           Pressure(psi)

MHC-101/102     5.1 to 6.38               1800         6.5 to 33.1         2000 to 2500
MHG-101/102     1.48 to 3.94             1800         7.6 to 20.4         2000 to 2500

Remote mount dump pump-MHC101

C series, Remote mount, built in relief valve, 2 or 3 line hook up, dual shafts for either shaft rotation, optional air shift control, factory set at 2000 psi, 1" keyed shaft, 1-1/4"NPT inlet, 1" NPT outlets, optional mounting bracket

MHC101-XX
Displacement XX=cu/in per evolution [GPM at 1000 RPM}
Remote mount dump pump-MHG-101

G series, Remote mount, built in relief valve, 2 or 3 line hook up, dual shafts for either shaft rotation, optional air shift control, factory set at 2000 psi, 1" keyed shaft, 1-1/4"NPT inlet, 1" NPT outlets, optional mounting bracket

MHG101-XX
Displacement XX=cu/in per evolution [GPM at 1000 RPM}
Print Print | Sitemap
© Hydro Design Service Inc.